Inkless paw print kit
A clean-touch pad, two print cards and a frame to keep them in. No ink ever touches the fur — you press the pad against a resting paw and the print transfers straight onto the card.
From €16 · ships in 24h
Products
Five categories, every one personalized
Nothing here is stocked. Each piece is engraved, printed or assembled after you confirm the wording, so the name is spelled the way you spell it and the dates are the right dates. Prices below are starting points — final price depends on size, material and the amount of engraving.
Category 01
Paw print keepsakes
The one thing that cannot be recreated later. Do this first.
Clay print frame kit, oak
Soft air-dry clay pressed into a solid oak double frame, with a 4×6 photo on the other side. The impression sets hard in about 24 hours and the frame edge takes a name.
From €32 · 31 × 21 cm
Clay print frame, pewter
Hinged pewter frame: clay impression on one leaf, photo on the other. White clay as standard because it reads clearly in any light — blush pink, sky blue or sand on request. You send the picture and we print and mount it so the frame arrives ready to stand.
From €29 · 17 × 12 cm · four clay colours
Category 02
Urns & keepsake vessels
Hold the whole of them, or just enough to keep close.
Eleven vessels, made to order. Every one can carry a name, a date and a short line of your own wording. Measurements are inside dimensions, so you can check the fit against your pet's weight.
Solid hardwood urn, black lacquer
Hardwood box with a lift-off lid and a matte black finish. A photo sits in the recess under the lid, out of sight until you want it. Engraved name plate on the front.
From €52 · 21 × 15 × 13 cm
Wooden urn with photo window
Solid wood with an inset window on the front for a 4×6 portrait, a lift-off lid held by an antique brass clasp and a paw motif. Lined inside, and it takes a name or a line under the window. The most-ordered shape for cats and small dogs.
From €42 · 20 × 13 × 13 cm
Sleeping cat memorial urn
Turned vessel with a sleeping cat cast into the lid. Sits on a shelf like an ornament, which is often easier than a plain box. Engraved on the base.
From €46 · holds approx. 45 in³
Cast stone urn, charcoal
Cast stone with a textured, concrete-like surface and a bronze-finished pet resting on the lid. Charcoal, stone grey, ivory, blush and four further tones from the same mould — send a photo of where it will sit and we will suggest the two that fit. The colour is pigmented through the material, not painted on, so it does not chip at the edges. Screw-fit lid with a gasket; name engraved on the base.
From €44 · 12 × 12 cm · eight colours
Square urn with photo window, charcoal
Square body, bevelled shoulders and a recessed window for a portrait — charcoal, stone grey or blush, and we print and fit the photo for you so it arrives ready. Engraving on the face or the lid. Sits flat, so it stacks with a photo frame beside it.
From €48 · 15 × 11 × 12 cm · three colours
Winged paw keepsake urn
Small resin vessel with a gold winged paw on the lid. Made for a partial amount of ash — a share kept at home when the rest is buried or scattered.
From €39 · 16 × 8 × 9 cm
Bone-shaped keepsake urn
A bone in white marble-finish resin, engraved with your own line. Light, so it is cheap to ship, and the shape reads instantly without explanation.
From €36 · 19 × 10 × 9 cm
Biodegradable garden urn, domed
Plant-based (PLA) vessel that breaks down in soil. Named on the lid, then planted with a shrub or a rose so the memorial keeps growing.
From €79 · choose ivory or sage
Biodegradable moon urn
A moon, cast in plant-based material with a cratered surface. Two sizes, and it can go into the ground whole. The one people photograph.
From €119 · small or large
Biodegradable planet urn
Navy sphere with a ring, on a low stand. Reads as an object on a shelf rather than a container, which is the point for a lot of people.
From €99 · small or large
Solid pine burial casket
An oiled pine casket with a paw carved through the lid, made for interment rather than display. Lined in unbleached cotton; the name is burnt into the side panel.
From €149 · 46 × 30 × 28 cm
Category 03
Memorial markers & displays
Stones, stakes and plaques that stay outside all year — plus the softer things for a windowsill.
Everything in this section is frost-safe and UV-stable. Stones are engraved here, not cast with a name already on them, so the wording is yours: a name, dates, or a line of up to about 40 characters.
Heart memorial stone with photo
Cast stone heart with a recessed window for a photograph, sealed with a UV-stable cover so the picture does not fade in sun. Sits on a plinth or flat on soil.
From €39 · 20 × 18 cm
Paw-shaped memorial marker
A paw-shaped marker on a low plinth, sized to sit under a favourite tree or beside the back door. The window in the middle takes a photo of your pet — send it and we print and seal it — and the panel lifts out so you can change the picture later. Printed in a stone-filled composite that weathers like cast concrete and weighs about half as much, so postage stays sane. Engraved line along the base.
From €34 · 15 × 15 cm
Cat memorial heart stone
Heart-shaped stone with a sleeping cat modelled in relief against the face. Engraving goes on the flat panel in front; we can also add a small photo plaque.
From €36 · 19 × 17 cm
Teardrop memorial stone
A quiet teardrop, drilled with a spike underneath so it stands in soil without a base. Reads well in a border or under a shrub, and takes a name and dates. The same teardrop is also made with a solar cell and a warm LED behind the engraving — it charges in daylight and glows for about eight hours after dark.
From €27 · 18 × 10 cm · solar version €45
Angel wing solar memorial
Angel wings in frost-resistant resin, with a solar panel and a small LED that lights the plaque at night. The wings are hollow, so it stands steady on grass or gravel.
From €52 · 30 × 20 cm
Robin memorial plaque
Resin plaque with a robin on the rim and room for a verse underneath. Free-standing or wall-fixed; the resin is filled rather than painted, so the colour goes all the way through.
From €28 · 16 × 12 cm
Steel silhouette garden stake
Powder-coated steel cut to your pet's breed silhouette, set on a heart with space for one short line. Comes with a ground spike; heights of 30, 60 or 90 cm.
From €22 · 30–90 cm
Cat silhouette memorial stake
The same steel silhouette cut as a sitting cat. Reads as a simple black shape in daylight; engraving and optional photo plaque are on the reverse.
From €19 · 30–90 cm
Category 04
Jewellery & wearables
Small, light, and with you all day. The easiest thing to ship anywhere.
Keepsake urn pendant
Anodised aluminium vessel on a 45cm chain with a threaded, gasket-sealed compartment for fur or a little ash. Brushed silver or rose gold; name engraved on the reverse, photo charm optional.
From €27 · wear or keep
Engraved locket, tree of life
A flat locket, laser-cut with a tree of life and room for a small silhouette beside it. Opens to hold a lock of fur or a folded note; nothing loose inside.
From €24 · 30mm
Stainless steel urn pendant
Steel cylinder with a screw lid, engraved with your own line across the front. Heavier and more solid in the hand than the aluminium piece, which is what some people want for an everyday wearer.
From €25 · 22mm
Crystal heart ash pendant
A heart filled with crystal, with the chamber behind it sealed for a small amount of ash or dried fur. Sits flat against the chest rather than swinging.
From €29 · 25mm
Crystal pendant, four colours
Faceted crystal ball with a threaded steel chamber inside. Clear, jet, amethyst and rose; send us the photo of the collar and we will suggest the two that sit best with it.
From €26 · 16mm
Collar tag, kept
An engraved tag in the same shape as the one they wore, on a short chain or a keyring. For people who kept the collar.
From €18
Sympathy bracelet
Woven cord with a small engraved paw bead. Light enough to post at letter rate; a common choice for a sympathy gift.
From €13
Category 05
Sympathy gifts & gift sets
Bought by someone else, on behalf of a friend. Highest average order value, and the lowest price resistance.
Bereavement gift box
A lidded wooden box, paw-printed on the lid, holding an inkless paw print kit, an engraved keepsake, a sympathy card and a candle. Arrives ready to hand over.
From €69
Shadow box display
A deep wooden frame with a compartment for a vessel, a photo mount and a small shelf for the collar. Made to hang or stand.
From €119
Personalization
What we can put on a piece
- Text engraving
- Name, dates, or a short line — up to about 40 characters per piece without crowding the design.
- Handwriting
- Send a clear photo of handwriting and we digitize it as a vector for engraving.
- Photo
- Cleaned, colour-corrected and previewed before production. Minimum 1000px on the long edge.
- Paw or nose print
- From our own kit, or a scan you already have. We clean the edges and remove smudges.
- Motifs
- Paw, heart, wings, rainbow bridge, or a breed silhouette cut from a supplied reference.
Proofs first, always. You see exactly what will be engraved before we touch the material — and we will redraw it as many times as it takes.
Names in any script that renders as a vector are fine, including Romanian and French diacritics (ă, â, î, ș, ț, é, è, ç, œ). Anything we cannot cut cleanly, we will tell you before you pay.
Buying for a clinic, a crematorium, or as a retailer? Our OEM and wholesale terms are on the services page.